FS: 2004 GSX-R600 Forks

gixxerguy · 08-07-2006, 09:22 PM

Still Forsale: One set of forks from a 2004 GSX-R600. They are in near perfect shape and are not bent. One fork has a very small scratch on it (see pic below), other then that they are in perfect condition. These forks were part of a complete front end I purchased and I only needed the triple tree clamp.

[img width=750 height=562]http://www.gixxerguy.com/external/pics/gixforks007_800.JPG[/img]

[img width=750 height=562]http://www.gixxerguy.com/external/pics/gixforks008_800.JPG[/img]

[img width=750 height=562]http://www.gixxerguy.com/external/pics/gixforks011_800.JPG[/img]

[img width=750 height=562]http://www.gixxerguy.com/external/pics/gixforks012_800.JPG[/img]

[img width=750 height=562]http://www.gixxerguy.com/external/pics/gixforks016_800.JPG[/img]

Asking $300 OBO

sverik · 08-07-2006, 09:45 PM

god,those would look f-ing sweet on my bike*sigh*. allas no money right now.
hopefully a diferent story in a month.

gixxerguy · 08-07-2006, 09:54 PM

Quote:

Originally Posted by SVÆrik

god,those would look f-ing sweet on my bike*sigh*. allas no money right now.
hopefully a diferent story in a month.

With the way things have been selling lately, I'll probably still have them in a month

Gleno · 08-08-2006, 05:59 AM

This is a perfect opp for someone with an older Gixx sixxer, SV, or ?? to upgrade to inverted forks AND radial mount brakes.

Good deal on the pogos. Who needs??

sverik · 08-08-2006, 08:45 AM

i do, can i get a loan from the national bank of gleno?

Mr Pheer · 08-08-2006, 09:35 AM

if you had posted this a month ago I would have grabbed them but now I've already bought new triple clamps and forks for my VFR... this would have been a cool upgrade with some RC51 triple clamps and suzki brakes and wheel

Z3RO ANG3L · 08-08-2006, 05:00 PM

I was just starting to research about upgrading the internals on my forks with the RaceTech springs... valve emulators(?-maybe) and + 20w oil ...but now these are looking really nice to me.

Anyone know what else would I need to set up my SV with these? If the whole set up isn't too cost prohibitive I might try to grab these. (....of course I would need some assitance on the install too.

)

Another hesitation I have is that I would have to say 'bye-bye' to those Suburban Machinery handlebars that I love so much.

gixxerguy · 08-08-2006, 05:11 PM

Quote:

Originally Posted by goddess of zero

I was just starting to research about upgrading the internals on my forks with the RaceTech springs... valve emulators(?-maybe) and + 20w oil ...but now these are looking really nice to me.

Anyone know what else would I need to set up my SV with these? If the whole set up isn't too cost prohibitive I might try to grab these. (....of course I would need some assitance on the install too.

)

Another hesitation I have is that I would have to say 'bye-bye' to those Suburban Machinery handlebars that I love so much.

Check out this website for upgrading your SV front end. I was going to do the samething to my SV but I sold it.

http://www.socalsvriders.org/

Gleno · 08-08-2006, 05:11 PM

Angel...without taking Ians topic too far off course, I think these pogos may be plug n play on your ride, with only a few other parts needed (calipers, wheel, axle, etc.). Retaining your stock upper and lower 3 clamps AND your handlebars. Lets discuss it elsewhere. Also...check the SV forums.

I'm in for the install help.

Gleno · 08-08-2006, 05:12 PM

Okay...so Ian beat me by 30 seconds. Carry on.

Z3RO ANG3L · 08-08-2006, 09:34 PM

Right-o!

Thanks for the direction guys, and sorry for the near-unintentional-hijack. Imma go do some further research.

AErik -if you can work it out to get these mofo-pogos do it, bro.... Otherwise, I might get back from my fact finding mission and snatch 'em up!